Products and equipment > Weatherstations > Cropview
iMETOS IMT280
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT 280 is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Leaf Wetness
- Global Radiation
- Wind speed (mechanical)
- Disease Models calculation
- Weather forecast
- Evapotranspiration calculation
- Wind Direction
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
Other iMETOS IMT Series variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
iMETOS IMT300USW
A complete solution for environmental monitoring, disease models, soil moisture and more
iMETOS 3.3 IMT300US is a durable and flexible data logger for all climatic conditions, powered by rechargeable battery and a solar panel.
The data logger has a built-in UMTS/CDMA modem for direct communication with the FieldClimate platform, and can handle up to 600 sensors through the intelligent sensor bus system. The system is extremely reliable due to non-volatile internal memory and can store up to 8 MB of logged data (ca. 1 month).
The iMETOS can also send SMS Alarms (user-defined via Internet) to alert you in cases od frost, strong rain, high temperature and more.
Data is regularly uploaded to FieldClimate platform where you can access it from any place at any time in real-time. Along with accessing the historical data and daily evapotranspiration values, you can also take advantage of decision support solutions like localised Weather Forecast, Disease Models and Irrigation Management.
- Air Temperature
- Relative Humidity sensor
- Rain Gauge
- Global Radiation
- Wind speed Ultrasonic
- Wind Direction Ultrasonic
- Leaf Wetness
- Evapotranspiration calculation
- Disease Models calculation
- Weather forecast
TECHNICAL SPECIFICATIONS
| Extension connector | Radio access point or Sentek Drill & Drop or ultrasonic wind sensor or two extra chain connectors – Pessl Instruments bus cable nodes |
| Memory | 8 MB flash memory |
| Internet connectivity | GPRS, HDSPA, UMTS, WiFi, LTE class 1, LTE class M (Q2/2020) |
| Alert | SMS, user configurable via website |
| Dimensions without sensors | 41 cm L x 13 cm W x 7 cm H |
| Weight without sensors | 2.2 kg |
| Measuring interval | 5 minutes (by default) |
| Logging interval | 10-120 min (user selectable) |
| Transmission frequency | User selectable |
| Battery | 6V, 4.5AH, Operating range: -35 °C to 80 °C |
| Solar panel | Dimensions: 13.5 x 13.5 cm, 2 Watt solar panel |
| iMETOS 3.3 base unit (no sensors included), internet based logger, battery 4.5Ah, solar panel, UMTS based, logger, mounting brackets |
iMETOS 3.3 AVAILABLE VARIATIONS
The iMETOS IMT Series comes in the following sensor variations:
- iMETOS IMT80: Air Temperature sensor and Rain Gauge
- iMETOS IMT180: Air Temperature and Relative Humidity sensor and Rain Gauge
- iMETOS IMT200: sensors for the calculation of most disease models: Air Temperature and Relative Humidity sensor, Rain Gauge, Leaf Wetness sensor
- iMETOS IMT280: Rain Gauge and all the sensors for Evapotranspiration calculation: Air Temperature and Relative Humidity sensor, Global Radiation and Mechanical Wind Speed.
- iMETOS IMT280US: same sensor set as iMETOS IMT280 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
- iMETOS IMT300: all the sensors for Evapotranspiration and Disease Models calculation: Air Temperature and Relative Humidity sensor, Rain Gauge, Global Radiation, Mechanical Wind Speed and Leaf Wetness sensor.
- iMETOS IMT300US: same sensor set as iMETOS IMT300 with Ultrasonic Wind speed and direction sensor instead of the mechanical sensor.
Need more sensors? Add up to 400 extra sensors from the wide range supported.
Request a Quotation or Download Brochure
Share this on:
